I recovered this Lost 14K gold wedding ring on 4/18/14 for MR. Chris C. Who explained that he lost his his ring about a month ago in Lake Raleigh while doing a polar plunge in the cold water.. It appears that when Chris jumped in the cold water that the cold water caused his hand / skin on his finger to shrink some and the ring came off.. Chris contacted me a couple weeks ago to help him locate his ring and i explained i would need permission from the college since N.C. State University owned the property.. Chris obtained permission and I met him at the lake to make the Recovery.. The ring was recovered in about 5 feet of water.. Here are some photos of the search .. There was alot of trash down there but I found the ring in about a hour of searhing..
I received a call yesterday from Eric a resident of Bellaire, Texas regarding his lost wedding ring. Eric reported he had lost his wedding ring in his backyard while playing water volleyball in his new pool. Eric said he remembered hitting a volleyball and his ring flying off his finger. Eric reported he searched his yard for several days trying to find his ring. Eric said after unsuccessfully finding his ring he located « The Ring Finders » on a Google a search.
I made the trip out to Eric’s home this morning and was given a walk through of how and where the ring was lost. The backyard was under renovations, a beautiful new pool, landscaping steps, and new and old landscaping underway. The backyard had little grass, so the remaining search area was going to be several areas of monkey grass, small hedges and a few flower beds.
Having the 6″ coil for the CTX3030 was a big factor in this recovery. Most of my work was pushing the small coil through the small tight hedges to work the ground below and around the hedges. It would have been nearly impossible to have accomplished this task with the stock 11′ coil.
I worked an area of the yard that seemed most probable for Eric’s ring to have landed based on the information of how it was lost. This area was relatively heavy with scrubs and money grass providing a great hiding place for a missing ring.. I thought for sure it would be the spot. After spending sometime working the hedges and monkey grass in this area with no results, I moved to the far side of the yard.
I started in on one of the flower beds, pushing the coil through the hedges blindly when I got a nice signal. I worked through the ground cover vegetation with a pin pointer and uncovered a series of intertwined gold loops. I ‘ll be honest, I initially thought maybe I had found an earring , I was thinking to myself what the heck is it. I knew it was gold, but did not register as a gold wedding band.
I hollered over to Eric who was working in the yard, and held out the dangling loops of gold, I saw a smile on his face, and rest is now history.
Eric explained that the odd configuration (the gold loops) was a Gold Arabic Puzzle Ring, and it had belonged to his grandfather original, passed to his father, and now to him. Thought to myself (priceless) and awesome, that is something you could never replace.
I have picked up a lot of rings, but this was my first ever puzzle ring and what a cool story. It didn’t take long to figure out why they call it a puzzle ring.
The video is a quick clip of Eric putting his ring back together.
Contacted by Gene a resident of Fulshear, Texas who advised he was searching the internet for metal detector rentals and came across « The Ring Finders » website. Gene wanted to know if I could assist him finding a metal property marker at his resident. Gene said he had a copy of the original land plot showing the location of the markers. The property plot was a nice reference but lacked any measurement to aid in locating the markers. Some how I am thinking it’s drawn like that intentionally. Gene said if we couldn’t find the marker, he was going to have to hire a surveyor to re-plot the property lines and it was going to be very expensive.
Made the trip out this morning and hit the property marker pretty quick, excavated, and tagged it for the homeowner.
Lost Texas A&M Class Ring Bryan College Station, Texas
Received the following e-mail 03-13-2014 Thursday
Hey John,
I got your contact info from the ring finder website. I recently
lost my Aggie ring. I believe it fell off in my neighbors yard, while I was
picking up some trash that had blown into his leaf piles. I’m 99% sure where it
fell. My neighbor gave me permission to look, but I have not been successful.
I’m a veterinary student in college station, tx. What would it cost to have you
drive out here and have a look? Do you know anyone in this area that would be
willing to assist? The ring is very important to me, and had a stone from my
grandmother in it.
Kohl
Spoke with Kohl on Thursday and he explained the circumstances surrounding the loss of his class ring. Kohl explained the ring was important, but the diamond in his ring had been handed down to him from his grandmother, making it irreplaceable. Kohl and I , worked out some travel expenses issues, and arrangements were made from Sunday morning. I made the 1:45 minute trip out to Kohl’s today meeting him at his residence. Kohl walked the search area with me pointing out the areas he believed he may have lost his ring. The search area was relatively small with several sections of the lawn had exposed dirt surfaces. I knew if the ring was in the remaining grass or leaves it would be a very fast recovery.
These are the difficult stories; the ring was not in the yard. I worked that lawn so hard I may have killed the remaining grass.
Having searched for A&M rings in the past, I knew the school had a lost and found specific to class rings. Even the local area police departments, having checked this for myself, contact the schools when a class ring is turned into them. I directed Kohl to notify the school, and to continue the search for his ring. Kohl advised he would notify me if he finds his missing ring.
The fine folks at Anderson Detector Shafts sent out an Excalibur II travel shaft for long term testing and evaluation 🙂 The product looks and feels very well built and should be a nice upgrade for traveling with an Excalibur II.
Anderson Detector Shafts also builds some really nice looking Carbon Fiber shafts, and a variety of other quaility detecting products.
Ryan at Andeson Detector Shafts will be your point of contact.
Repairing or Cleaning your scratched Metal Detectors Display Screen.
Several months back while working a job, I rubbed the display screen on my CTX3030 with a wet muddy glove and scratched the display screen.
The scratches were not always visable, but with the sun hitting it just right, it was very noticable and distracting.
Came across this product by accident, but it worked very well on repairing the display screen on my CTX330; I feel pretty confident it would work well on any detectors display screen.
The product came out of a 3M headlight restoration kit purchased at Harbor Freight. After using the kit for it’s intended purpose, I tried a dab of the final polishing compound on the CTX3030’s screen and it took out the scratches with no problem.
Recent Discovery, the new White’s Bullseye TRX Pinpointer.
As I favor Minelab products, I am going on my 6th and 7th Minelab pinpointer pro. (all under warranty) I am not sure if it’s the Texas heat, humidy, or moisture while occasionally operating in some damp enviroments, but failures have plagued my pinpointers.
I was getting ready to send both back on warranty issues, and did not want to be without a pinpointer. A quick Google search, and I discovered White’s had jus released the new Bullseye TRX.
Although, I have not field tested the new TRX, I am really liking the sensitivity, as well as the lanyard attachments on both the pointer and carrier.
The build seems solid, and if it runs trouble free, it might be my new go to product for pinpointers.
Hello, heres another post of a lost ring that has been Recovered.. On 2/13/2014, I received a text & a call from a NC State Highway Patrol Officer who explained to me he had lost his ring in the snow while at the scene of a accident where the vehicle was down the hill in a ditch off interstate 85.. He had lost his ring while trying to open the door of the vehicle and the ring flew off his hand.. I met the officer at the location and started my search.. I was able to recover his ring in about 10-15 minutes.. After the recovery we talk a few and it was a pleasure to help him find his lost ring.. Its always a good day when you can help someone out.. I did forget to get a picture on scene but he was nice enough to text me a picture of the ring to use in this post..
Hello , here is another post of a recovery I made last night for a guy not to far from me.. Mr. Brian B. gave me a call yesterday evening just before dark about a ring he had lost while having a snow ball fight with his wife.. When speaking to him he gave me all the details and explained that when he was shaking the snow and water off his hands the rings flew off and he heard it ping / hit the ground.. He then tried to find the ring but was unsuccessful since there was snow everywhere and the ring was hidden in the snow.. even though it was getting dark I offered to come out and find it for him in the dark anyway since he was close and I really enjoy helping people recover their lost items.. It took me about 30 minutes to get there and I recovered the ring pretty fast using my Garrett ATPRO metal detector.. The search took about 15 minutes.. The ring was found only a few feet from where he lost it.. I was really happy to help MR. Brian B. and he was very happy to have it found.. He is a really nice guy and it was a pleasure to help him..
On 1/22/2014 I received a call from a gentleman and his wife in Durham N.C. about a lost wedding band that he had lost off his upper back patio while using his grill. After speaking to the gentleman and his wife I agreed to meet with them at their home where he lost his wedding band. On 1/24/2014 I drove to their home that morning to do the search and meet with the gentleman to help him locate his missing ring. The gentleman also advised me he had attempted to locate the ring himself but was unsuccessful . He had explained all the details to me on the phone prior to me coming out so i had a good idea of where to start looking. When he was using his grill he had burned his hand and when he got burned he started shaking and flinging his hand around.. That is when the ring flew off his finger. After a couple hours of searching the ring was recovered and As you can see from the pictures he was very relieved and grateful to have his ring back . These people are very nice and it was my pleasure to help them.
